ICopy-XS

€375,00

The iCopy-X is the ultimate RFID Cloner.

Whether you're a pentester, security researcher, lock professional or hobbyist, the iCopy-X makes everyone an RFID Expert.

Depending on your needs, the iCopy-X comes with different Card Packs.

Card Pack:

iCopy-X: Introduction

Getting to know the ultimate RFID Cloner

The ICopy-X is the next generation of RFID Cloning tool.

Whether you're a pentester, researchers, locksmith, hobbiest or building manager, the iCopy-X makes cloning RFID tags rapid and easy.

Built around the powerful Proxmark 3, the ICopy-X is a portable device specialised in the rapid cloning of RFID badges, capable of automatically reading, cracking and writing the vast majority of Low Frequency (125KHz / 134KHz) and High Frequency (13.56MHz) RFID tags on the market.

100% portable and pocket-sized, the iCopy-X is built with simplicity in mind. No cables required, no external computers or antennas. With its built in battery, you just pull the device out of your pocket, and you're ready to go.

Designed to be intuitive, users control the device via its screen and navigation buttons to place a badge and start the desired operation.

The iCopy-X comes in multiple models - the "X" (Basic model), "XR" (Intermediate model) and "XS" (Advanced Model).

This is the "XS" model - the most powerful available.

Capabilities

Basic functionality

Auto-Clone: The flagship feature of the iCopy-X is its powerful "Auto Clone" function: place a badge of any type, and the iCopy-X does the rest: Detecting tag frequency & type, and then reading the badge contents - even if it is encrypted or password protected.

Perfect copies of the source badge can then be written to new blank badge.

Badge Information: Users can rapidly scan a badge to determine it's frequency, type and unique identifier (UID).

Read / Write: Additional copies can be easily made from previously read badges - the iCopy-X saves all badges for rapid retrieval. Saved badges can also be exported / imported if required.

Intermediate functionality

Sniff: The iCopy-X can perform the "Reader Attack" (MFKey32/64)- providing real-time sniffing of MIFARE Classic keys from a reader, to export or to add to the internal key list.

Emulate: Badges of all types can be emulated directly from the device. In emulation mode, the iCopy-X acts like a badge, and can be used to rapidly simulate RFID tags. This function is especially useful for pentesting engagements.

Expert functionality

Proxmark Mode: The iCopy-X is built around a full Proxmark 3 device. Expert users can plug the device into their computer / smart-phone and interact directly with the Proxmark Client.

With Proxmark Mode, the full Proxmark platform and tools that you know and use are available.

Supported Badges

The ICopy-X supports the vast majority of low frequency (125KHz / 134KHz) and high frequency (13.56MHz) badges available on the market.

Supported LF Tags

• EM4XX
• T5577
• HID Prox
• Indala
• AWOD
• ioProx
• Viking
• FDX-B
• KERI
• VISA2000
• HITAG
• Motorola
• Paradox
• Presco
• GProx
• Securakey
• PAC
• Stanley
• NexWatch
...and many more

Supported HF Tags

 • MIFARE
◦ MIFARE 1K / 4K (4 & 7 byte UIDs)
◦ MIFARE Ultralight
◦ MIFARE Ultralight C
◦ MIFARE Ultralight EV1
◦ NTAG (Multiple memory sizes)

• ISO14443B
◦ ICLASS Legacy
◦ ICLASS Elite
◦ ICLASS SE (with the iCS Decoder Tool)
◦ ICLASS SEOS (with the iCS Decoder Tool)

• ISO 15693
◦ iCODE SLI (Partial)
◦ iCODE SLIX (Partial)

• ISO14443
◦ Topaz
◦ FeliCa
◦ Legic

Please note: The iCopy-X does not support the following badges: MIFARE DESFire, iCLASS Elite with Custom Keys / EMV (Bank / Credit Cards).

Cloning iCLASS SE / iCLASS SEOS requires the iCS Decoder accessory.

Blank Tag Packs

The ICopy-X has three different Blank Tag Pack options: Basic, Intermediate and Advanced. You can chose which option you'd like your device to come with.

When you need more blanks, Genuine iCopy-X Blank Tag Packs can be purchased here.

Please note: The device only supports ICopy-X blank badges. Generic blanks are not supported on the device.

BASIC CARD PACK

• MIFARE 1K 4-Byte Compatible Blank Tags
 ◦ 4x Magic Cards ("Gen1")
 ◦ 4x Direct Write Cards ("Gen2")
 ◦ 4x One-Time-Write Cards ("Gen2a")

• Low Frequency
◦ 4x T5577 Cards

INTERMEDIATE CARD PACK

• MIFARE® 1K 4-Byte Compatible Blank Tags
 ◦ 4x Magic Cards ("Gen1")
 ◦ 1x Direct Write Cards ("Gen2")
 ◦ 1x One-Time-Write Cards ("Gen2a")

• 1x MIFARE® 1K 7-Byte Compatible Blank Tag
• 1x MIFARE® 4K 4-Byte Compatible Blank Tag
• 1x MIFARE® 4K 7-Byte Compatible Blank Tag

• 1x MIFARE Ultralight® Compatible Blank Tag
• 1x MIFARE Ultralight-C® Compatible Blank Tag
• 1x MIFARE Ultralight-EV1® Compatible Blank Tag
• 1x MIFARE NTAG® Compatible Blank Tag

• Low Frequency
◦ 3x T5577 Cards

ADVANCED CARD PACK

• MIFARE 1K 4-Byte Compatible Blank Tags
 ◦ 2x Magic Cards ("Gen1")
 ◦ 1x Direct Write Cards ("Gen2")
 ◦ 1x One-Time-Write Cards ("Gen2a")

• 1x MIFARE 1K 7-Byte Compatible Blank Tag
• 1x MIFARE 4K 4-Byte Compatible Blank Tag
• 1x MIFARE 4K 7-Byte Compatible Blank Tag

• 1x MIFARE Ultralight® Compatible Blank Tag
• 1x MIFARE Ultralight-C® Compatible Blank Tag
• 1x MIFARE Ultralight-EV1® Compatible Blank Tag
• 1x MIFARE NTAG® Compatible Blank Tag

• 1x iCLASS® Legacy Compatible Blank Tag
• 1x iCLASS® Elite Compatible Blank Tag

• 1x iCODE® SLI/SLIX Compatible Blank Tag

• Low Frequency
◦ 1x T5577 Card

All supported Low-Frequency tags can be cloned onto "T5577" cards.

Hands on

Unboxing the iCopy-X

The iCopy-X is safely packed in a high-quality box containing everything you need to clone badges like a pro: the iCopy-X, a Basic Blank Pack, Instruction manual, lanyard and USB-C Cable.

Technical Information

What's Included

Basic Pack
◦ 1x iCopy-X (XS Model)
◦ 1x Basic Card Pack

Intermediate Pack
◦ 1x iCopy-X (XS Model)
◦ 1x Intermediate Card Pack

Advanced Pack
◦ 1x iCopy-X (XS Model)
◦ 1x Advanced Card Pack

Device Specifications

  • Screen: 1.3 Inch 240x240 RGB LCD
  • Tactile Controls: Arrow Keys, Select Buttons
  • Internal Memory: 256MB Ram, 16GB User Storage
  • Internal Battery: 2000mAh Li-ion battery
  • RFID System: Customised Proxmark 3
  • Connectivity: USB-C
  • Dimensions: 120 x 55 x 24mm
  • Weight: 113g

Technical Resources

Shipping & Delivery Information

Each iCopy-X is dispatched from our European warehouse. You will receive a tracking number upon item dispatch. The address used on your purchase is printed as a label - please double check your address to avoid mistakes.

For all European Union destinations, all shipments are DDP - Delivered Duty Paid. This means all applicable VAT/TVA, shipping costs and customs fees are pre-paid.
You will not be charged by the courier service / post office or customs.

For all destinations outside European Union, all shipments are DDU - Delivered Duty Unpaid. This means that your country's custom service impose a VAT/TVA/Import Duty on your shipment.